DISTRIBUTION
The valves are controlled by a camshaft driven by a toothed belt from the crankshaft. The gears on the camshaft and crankshaft are provided with control marks, …
Engine hull 1300 Turbo – Fiat Uno
The hull is cast iron with cylinders made directly into the hull material. This engine part is from a naturally aspirated engine 1300. however, it is adequately reinforced. The hull is wearing …
Engine flywheel repair 1300 Turbo – Fiat Uno
Flywheel repair
■ Check the mating surface of the flywheel with the clutch. If it is scratched, it can be processed to the maximum depth 0,5 Mm. Belongs …
Verification and replacement of pistons and connecting rods 1300 Turbo – Fiat Uno
Verification and replacement of pistons and connecting rods
■ Detach the piston from the connecting rod and mark together. The piston pin is held laterally by a spring ring. This ring …
Engine crankshaft 1300 Turbo – Fiat Uno
Checking the crankshaft
Engine crankshaft 1300 Turbo is nitrided. If the shaft journals show signs of wear, it should be regenerated. You need to pay attention, …
Head repair 1300 Turbo – Fiat Uno
Further disassembly of the head is performed as described for the engine 1300 due to the same design. The values that characterize the wear limits of individual elements are given below …
Installing the toothed belt Engine 1300 Turbo – Fiat Uno
Installing the toothed belt Engine 1300 Turbo – Fiat Uno
■ Attach the belt cover to the fuselage.
■ Install the pinion on the camshaft, tighten the bolt to the torque …
The cylinder head 1300 Turbo – Fiat Uno
The cylinder head 1300 Turbo is a two-piece die-cast aluminum alloy.
The camshaft is mounted in a separate housing together with the valve lifters. To the forehead of the head there is …
Engine disassembly 1300 Turbo – Fiat Uno
Before starting the demolition, plug all engine openings with clean rags, and then wash it from the outside. The location of all moving parts should also be marked (beige …
Removal / installation of the engine 1300 – Fiat Uno
Fiat Uno Turbo i.e engine. it is built transversely at the front and forms with the clutch, gearbox and main gear one drive unit. Engine 1300 Turbo …