As a rule, hydrodynamic transmissions are used in motor vehicles as continuously variable gearboxes. As in the case of a torque converter, a rotating fluid is the driving force …

Outer part of the steering mechanism, outside the gearbox, it engages the gearshift lever with the shaft of the internal part of the control mechanism protruding beyond the gearbox housing. Outer part …

In block drive systems, in which the gearbox is located close to the main transmission, two-shaft gearboxes are used. The torque is transmitted directly from the engine …

In such a gearbox, the gear pairs on the intermediate and main shafts are constantly in mesh, while the main roller wheel can get on it …

The gearbox used in the classic drive system is a separate unit, enclosed in a separate housing. Such a box usually has three rollers:

■ Input shaft, taken out …

Three types of gearboxes are used in motor vehicles, differing in the method of control. These are:

• ordinary gearboxes, where you choose the right gear (running) …